Electrical gear, process instrumentation, pneumatics, gas safety and PPE — sourced, supplied and supported by one partner, so your plant keeps running.
Specify it, source it, install it, keep it calibrated — four services around a single catalogue.
Genuine parts from the brands below, consolidated into one order, one delivery and one invoice.
Panel building, instrument mounting, sensor alignment and loop checks carried out on site.
Scheduled bump tests, gas detector calibration, scale verification and planned instrument servicing.
Operator training on detection and measurement equipment, plus technical backup after handover.
Filter the range, then open any category for models, part numbers and specifications.
Choose a category above to read its models, part numbers and specifications.
The safest, simplest system and the most effective in energy distribution solutions — covering protection, command and installation for every scale of site.
Product families include PLCs and HMI touch screens, motion/servo drives, variable speed drives, DIN-rail I/O modules, emergency stop and pilot devices, MCBs and RCBOs, and multi-pole circuit breakers.
Fittings, gauges, couplings, control valves, cylinders, service units, solenoid valves, regulators, connectors and silencers — the full Festo line carried in stock.
Barbed fittings & pressure gaugesPortable multi-gas detectors for the reliable measurement of oxygen, toxic and combustible gases and vapours.
Simultaneous, continuous measurement of up to five gases. Flexibility through sensor diversity, smart sensory analysis, Ex-resistant poisoning sensor, multiple alarms, 360° visual alarm with multi-sound (>100dB), big backlit scratch-resistant display, rugged waterproof housing, built-in high-performance pump, intuitive software and data management.
Ergonomic design with infrared sensor technology — the smallest gas detector for up to 6 gases. 360° visual alarm, backlit display visible in darkness or water, dual/simple sensor accuracy, combinable with hydrogen, suitable for Ex-zone 0, area monitoring.
Explosion-proof transmitter for combustible gases at the lower explosion limit (LEL), using a high-performance infrared PIR 7000 sensor. 3-wire 4–20mA analog output with relays, Modbus and Fieldbus. Three relays for external equipment, remote sensor capability, data logger; docking station included with Polytron 5000/8000 series.
RKI GX-6000 — a rugged, hand-held PID gas monitor simultaneously monitoring up to 6 gases, with a removable impact-resistant rubber boot and internal sample pump.
2 smart channels accept PID, IR or super toxic sensors. PID library of 600+ VOC gases (30 favourites + 8 recent). Benzene-specific version available. Four PID sensor options: 10.0 eV, 10.6 eV (low/high range), 11.7 eV — any two can be installed together. Weight ≈400g; rechargeable (14+ hrs) or 3× AA alkaline (8+ hrs); operating range −20°C to 50°C; safety ratings ATEX, IECEx, CSA, TIIS, CE.
Warrior WSK / WFK / WBK / WLK — washdown scales for food, pharmaceutical, veterinary and industrial use. IP66-rated stainless base, dynamic weighing, check-weighing LEDs, backlit display, RS-232 output.
| Model | WSK 8 | WSK 16 | WSK 32 | WBK 32 | WBK 32H | WBK 75 | WFK 75 | WFK 75H | WFK 150 | WLK 150 |
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 8kg | 16kg | 32kg | 32kg | 32kg | 75kg | 75kg | 75kg | 150kg | 150kg |
| Readability | 0.5g | 1g | 2g | 2g | 1g | 5g | 5g | 1g | 10g | 10g |
| Pan size | 250×250mm | 300×400mm | 400×500mm | 450×600mm | ||||||
| Net weight | 6kg | 9kg | 13kg | 19kg | ||||||
Sealed keypad, external calibration, parts counting, selectable digital filtering for dynamic/animal weighing, zero-tracking, rechargeable battery, programmable auto power-off. Weighing units: g, kg, lb, lb:oz, oz, N. Housing: stainless steel. Power: 12VDC 800mA adapter or internal rechargeable battery.
Nimbus NBL precision balances — readabilities from 1mg to 0.1g, compact single-piece construction for greater stability. 5 weighing applications including density determination, percentage weighing and dynamic weighing. Suitable for universities, medical labs and vets. Removable draft shield on 0.001g models, USB + RS-232, GLP-compliant printouts, multilingual display, lockdown device.
CPWplus series (CPWplus / M / P / L) — stainless platform scales for field, lab or warehouse, with hold function and splash-proof housing.
| Model | CPWplus 6/6P | CPWplus 15/15P | CPWplus 35 (P/M/L) | CPWplus 75 (P/M/L) | CPWplus 150 (P/M/L) | CPWplus 200 (P/M/L) | CPWplus 300L |
|---|---|---|---|---|---|---|---|
| Capacity | 6kg | 15kg | 35kg | 75kg | 150kg | 200kg | 300kg |
| Readability | 2g | 5g | 10g | 20g | 50g | 50g | 100g |
| Pan size | 300×300mm | 500×500mm (M) | 900×600mm (L) | ||||
Wall-mount indicator bracket, RS-232 interface, external calibration, backlit LCD (22mm digits), 2 second stabilisation, 0–40°C operating range, mild steel base.
CBK bench check-weighing scales — parts counting, percentage weighing, check weighing with amber/green/red LED limit indicators, memory accumulation, ABS housing, AC or rechargeable battery.
| Model | CBK8a | CBK16a | CBK16aH | CBK35a | CBK70a | CBK100a |
|---|---|---|---|---|---|---|
| Capacity | 8kg | 16kg | 16kg | 35kg | 70kg | 100kg |
| Readability | 0.1g | 0.2g | 0.1g | 0.5g | 1g | 2g |
| Pan size | 225×275mm | |||||
| Net weight | 4.1kg | |||||
Designer and manufacturer of pressure and temperature instruments, chemical seals and accessories.
Indicates relative pressure between two points; used in filter systems, pumps and pipeline systems across heating, climatic, ventilating and water management applications. Suitable for all gaseous and liquid media that will not obstruct the pressure system.
Microprocessor-controlled with ceramic pressure sensors for high-precision lab and processing use. Backlight, min/max and high/low trip points; every sensor is aged and tested before assembly.
Electrical contacts for control processes and warning signals. Double contact regulates pumps and compressors between two setpoints; single contact for warning or power-off.
Monitors product, process and hydraulic pressure. Applications: mining hydraulic posts, oil rig ballast tanks and drilling platforms, refrigeration compressor monitoring, industrial gas turbine and high-voltage cable cooling systems.
A full valve range for water, steam and process fluid handling.
Horizontal Multicellular Inox Pumps — MULTi-H INOX 304 / 316L, for pumping clear liquids in housing, agricultural and industrial sectors.
Data Acquisition — Recorder SMARTDACPLUS: modular acquisition up to 100 channels, multipoint touch screen with zoom, freehand writing on screen, automatic .xls/.pdf reports, I/O up to 1000 channels, FDA/NADCAP compliant, GX/GP/GM/DX models.
Stabilizer UT Advanced: 8 control algorithms, universal 4–20mA/voltage/pulse I/O, automatic PID adjustment, programmable LADDER automation, Ethernet/RS485/Profibus-DB networking.
Physico-chemical analysis
Wheel loaders, dozers, scrapers, graders, articulated dump trucks. Aggressive E3/L3 non-directional tread, all-steel radial, heat-reducing casing.
Wheel loaders, articulated dump trucks, scrapers, dozers. Wide shoulder design for sidewall protection and flotation, E3+/L3+ tread.
Mobile cranes, highway and off-road. Self-cleaning non-directional tread for fuel efficiency and comfort.
Extreme loader applications: surface mines, quarries, scrap yards, underground mines. Extra-deep L5 tread pattern.
Tough applications, hardy pattern and deep tread, long wear life. Suited to waste handlers such as the Komatsu WA450-6. Wheel loader use: scrap yard, slag steel mills, dumping sites.
Balanced traction and loading for short and middle distance rotation, such as the CASE 521E. Tele-handler and wheel loader, construction sites.
V-belts, timing belts and multi-rib serpentine belts for automotive and industrial drive applications.
Temporary battery backup during power failure, with battery failure analysis and early warning for preventive maintenance.
Line-interactive, high-performance tower model. Protects electronics against power failure and overvoltage; backup power until supply normalises.
Lightning protection, off-line battery management, 330W / 550VA, RJ45 network protection.
Site intrusion alarms, sirens and door/window contact sensors integrated with access-control and CCTV installations.
Metric frame to AS1359. 0.75–185kW, IC411 cooling, meets AS1359.5 table B3, 380–415V 3-phase 50Hz, Class H insulation, IP66, cast iron with side terminal box. Foot, foot+flange or flange mountings; the 185kW 4-pole is available with an oversized shaft and fabricated steel terminal box.
Stock 150–450kW (larger on request), AS1359.5 table B3, Class H insulation, IP66, X15 orange finish. Cast iron with side or top mounted fabricated steel terminal box. Foot, foot+D-flange or D-flange mountings.
Number one in South Africa for storage of carbon, stainless steel, duplex, Hastelloy and titanium materials — exporting across Africa, Madagascar and the Indian Ocean.
MA300 — metallic casing outdoor access control terminal with fingerprint reader, exit button, siren/strobe and door magnetic contact sensor. Integrates with ZKAccess 3.5 software over a networked door-sensor, alarm and card-reader topology.
Quotes, technical specifications or a site visit — reach the right person directly.
